Anyway, I thought it might be helpful for you to see what goes into a custom order with our shop (or pretty much any jewelry shop), and what happens next, in what order, and where the challenges are.
As you know, custom orders divide into two kinds for us.
(1) Custom items created from stock pieces: i.e. the 5mm round sunflower pendant in rose gold with color change garnet and hauynite.
(2) New pieces made from scratch in CAD. This includes modifications to existing pieces because once you make one change (i.e. the size of the center), everything else changes (the height, the number of outside petals or melee, etc).
Now that I take so many custom orders, it is my job to advise on color combos, setting styles, and metals, i.e. suggesting that a particular stone should not be set in a harder metal, or should be prong set and not bezeled. This takes a lot of back and forth. Brandy, my CAD designer, then makes an initial 2-D drawing or layout of how the ring would look from the top. We need that to start because we need to see how many gems are needed if they go into a halo, or petals, or we need to see how many stones can be put into a row, or in which type of layout. Without that it is hard to calculate stone cost (and it is nearly impossible to do it before having this layout).
|Example of Three Ring Layouts|
After that we collect the other details from the customer. We need the ring size so we can make the file in the right size, and the metal so we can calculate weight. Exact weight can't be determined until after the model is finished of course, so we have to estimate when customers ask us. Sometimes we use an order form, which is still in 'draft mode' so it hasn't been put on the blog. But you can look at it here. Otherwise we just create the listing on Etsy and/or in Excel.
Once gems are purchased for the job, or once the details are hashed out and a custom listing is made, we create what is called a "Job Envelope". That's where we put all the details of the order, which are also kept updated in Excel. Here's a photo of what it looks like.
The job envelope stays with the order until completion, and all parts that have to be purchased as well as all gems go in there. The steps needed are listed in the order in which they come up.
Assuming it is a stock item, we first order the piece from our casting service, Taba casting. They stock each of our molds, which has a certain number (at some point these will be incorporated into our SKU to avoid mistakes at this juncture). We order rings in the size they are needed because those can be sized in the wax. And we order in the desired metal of course. Taba takes about a week to turn an order around.
Then all pieces go into pre-polish, where the sprue is being cut and the piece is tumbled and cleaned (all castings need a little TLC before they can go to setting).
|Before & After Pre-polish|
Setting is next. If stones break during that process I have to supply more. If I remember, I put extra melees into each job envelope so I can save myself a trip back home. Pierre is my setter, as you know, but I also have a backup guy, Ethan, now that my shop is growing and I need more help. Both are traditionally diamond setters but they have adapted their tools and their skills to deal with my colored stones.
From setting, the piece goes to final polish. This is where rhodium is applied to white gold as well, and all the dirt and grime from setting is washed out in ultrasonic (ultrasonic has to be very brief with colored stones but Arman, my polisher, is used to it by now).
As you may gather, each step involves a different person because each job is specialized - each needs its own tools and skill set. All the people I use are located on the same block or one block away but we still run around all day between stops. We usually map out our route as best we can ahead of time but we have to go back and forth when parts have to be purchased or other questions come up. Each person wants a few days to complete their job, except final polish which is same day. So the more steps, the more time it takes. If something goes wrong, i.e. a part melts down a bit during soldering, we may have to start over because we don't stock everything in all metals. We do stock scroll earrings now, but little else (too many parts, too much money).
A note on engraving. Alex, my engraver, hand engraves my pieces before the mold is made. So it doesn't become part of the custom order process unless a piece is made in CAD from scratch. This saves time, though it slows down production of a first piece. Alex is a true artist, he works for the top design houses in NY (and me, lol). And he will not be rushed. Sometimes he has a piece for a month. The result is worth it however.
Well, this about sums it up. I hope this blog entry provides a little clarity as to why not everything goes as fast as we hope, and why a few things are way faster than you expect (i.e. setting a gem into a scroll stud). And how mistakes can creep in (= everywhere).
Custom pieces, despite the difficulty they pose, seem to have become our signature style. So we appreciate both your support, and your patience, as they are being created.